Showing posts with label opteka. Show all posts
Showing posts with label opteka. Show all posts

Opteka 62mm Screw-in Collapsible Rubber Lens Hood / Shade Review

Opteka 62mm Screw-in Collapsible Rubber Lens Hood / Shade
Average Reviews:

(More customer reviews)
It works well for a 30 mm or longer lens (nice and long for plenty of shade). Less then about 30 mm (wide zooms, etc.) you'll get vignetting. It has a metal mounting ring that's also inside threaded and long enough to use a center pinch lens cap, etc., after the hood. It works very well with a Circular Polarizer on the lens first then the hood. The hood will rotate the Polarizer, & sense its round, not petal shaped the shade is not changed. Of course, a screw in hood is the only way to still have a hood if you use a step up ring (if you don't want to buy filters for every size lens). The hood is collapsible but the rubber is kind of thin so it won't hold its' shape if you leave it on & shove your camera into a holster bag. The threads on the ring are clean and well machined. It seems well made.

Click Here to see more reviews about: Opteka 62mm Screw-in Collapsible Rubber Lens Hood / Shade

Opteka rubber lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended you also get the added benefit of some extra protection from accidental impact.

Buy Now

Click here for more information about Opteka 62mm Screw-in Collapsible Rubber Lens Hood / Shade

Opteka LS-110 Photo Studio 9.1 foot (110") Air-Cushioned Aluminum Light Stand Review

Opteka LS-110 Photo Studio 9.1 foot (110) Air-Cushioned Aluminum Light Stand
Average Reviews:

(More customer reviews)
This stand is very big. It's much better built than the value stand I was using. The air shock thing just seems like springs inside. A flash and umbrella would probably survive a full length drop, but I wouldn't test it. I don't know if it's just me, but I think it weighs more than 5 lbs. I don't have a scale handy, but it's definitely more than my 5 lb laptop. I will certainly buy a few more of these.

Click Here to see more reviews about: Opteka LS-110 Photo Studio 9.1 foot (110") Air-Cushioned Aluminum Light Stand

The Opteka LS-110 light stand is aluminum, 3 sections, with sure-twist section locks. It rises to a maximum height of 110'. If you forget to tighten any section with your light mounted, the light slowly descends, thanks to the air-cushioning of this stand. This useful feature saves equipment, and fingers from harm during busy photo sessions. Will work with many reflectors including the Opteka 43" 5-in-1 reflector with the RH-42 bracket.

Buy Now

Click here for more information about Opteka LS-110 Photo Studio 9.1 foot (110") Air-Cushioned Aluminum Light Stand

Opteka .45x HD² Wide Angle Lens for Fuji S5500 S5200 S5100 S5000 Review

Opteka .45x HD² Wide Angle Lens for Fuji S5500 S5200 S5100 S5000
Average Reviews:

(More customer reviews)
I am very happy with my purchase. It is so easy to use. I thought that I would need to buy an additional adapter as the reviewer below stated but I guess he / she was confused. The lens attaches directly to the adapter that comes with all Fuji S5000's. I gain about 40-45% more picture with this lens attached.

Click Here to see more reviews about: Opteka .45x HD² Wide Angle Lens for Fuji S5500 S5200 S5100 S5000

Nothing changes the way you see the world like High Definition², and no company does High Definition² like Opteka. In the professional setting, Opteka's glass optics define High Definition. Change the way you view the world. Enjoy outstanding detail, enjoy enhanced clarity, enjoy Opteka. Since it fits right over your camera's existing lens system, a wide-angle converter affects the full zoom range of your camera's lens. A wide-angle converter increases your angle of view - scenes include more

Buy NowGet 57% OFF

Click here for more information about Opteka .45x HD² Wide Angle Lens for Fuji S5500 S5200 S5100 S5000

Opteka 58mm Screw-in Collapsible Rubber Lens Hood / Shade Review

Opteka 58mm Screw-in Collapsible Rubber Lens Hood / Shade
Average Reviews:

(More customer reviews)
Lens hoods or shades are used to prevent flare from light sources at close angles to the shooting axis. They are usually necessary on telephoto lenses. Using a hood on a wide angle lens can cause vignetting, which is why 'petal' style shades, with the corners cut out, are used on shorter lenses. (Not just because they look cool.)
If you've never used a rubber lens shade, here are a few things you should know:
1. Even when collapsed, a rubber lens shade acts as a bumper to protect the lens from banging into things. This is especially important on long lenses.
2. The hood is useful for shooting through glass by eliminating reflections, even from your own flash. You can angle the lens a little without losing the contact.
3. The hood can be shaped to fit into special situations and will bounce back.
4. Adding or changing filters can be accomplished without removing the hood from the lens.
ABOUT THIS SHADE:
A very good shade for the money. The threads fit smoothly on both the lens and filter sides. The rubber is flexible, but rigid enough to keep its shape. The hood is configured in a Z-fold which gives you different degrees of shading.
BUT: The hood is too deep to use on shorter lenses without vignetting. Also, it sticks out about a 1/2 inch from the lens, making the lens an inch wider at the front. You might have issues with fitting into some holster style camera bags.

Click Here to see more reviews about: Opteka 58mm Screw-in Collapsible Rubber Lens Hood / Shade

Opteka rubber lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended you also get the added benefit of some extra protection from accidental impact.

Buy Now

Click here for more information about Opteka 58mm Screw-in Collapsible Rubber Lens Hood / Shade

Opteka HD² 0.20X Professional Super AF Fisheye Lens for Canon Powershot G10 & G11 Digital Camera Review

Opteka HD² 0.20X Professional Super AF Fisheye Lens for Canon Powershot G10 and G11 Digital Camera
Average Reviews:

(More customer reviews)
The descriptions of this lens are sorely lacking, so the first part of my review is information the manufacturer should have provided:
What you get in the box:
* G10 flange-mount to 58mm threaded adapter
* 58mm to 52mm adapter ring (and a 55mm to 52mm adapter ring you won't need with the G10)
* Fisheye add-on lens (52mm thread mount)
* Front and rear lens caps
In other words, you don't have to buy anything else along with this lens. If you have a Canon G10, it comes with everything you need. I had to call 47th Street Photo to confirm that.
When set up and mounted, the entire lens projects about five inches from the front surface of the camera, making it look like a miniaturized SLR.
Now that I have the lens, I understand a bit better how it works. At the camera's widest zoom angle, the fisheye circle takes up the center 1/4 of the frame, with black around it. At about mid-zoom, the majority of the frame is image, with black corners. At full zoom, you have roughly the equivalent of the camera by itself at its widest angle, and no barrel/fisheye distortion is evident. With the variable zoom, you can choose whether you have a rectangular or circular fisheye effect, although the barrel distortion becomes much less evident as you move toward rectangular.
The glass quality is pretty good. Images are clear, and the autofocus system works correctly. Opteka recommends setting the camera to a narrow aperture and focus at infinity, although shooting in low light with normal (large aperture) settings seems to work well with the G10. There is noticeable chromatic aberration at the edges of the fisheye circle, but we're talking about a $60 lens here.
The mount is a little shaky feeling -- the add-on barrel doesn't snick solidly into place like an SLR lens does (which is a pity, it wouldn't have been hard to make the mount that carefully; I don't know if this is a limitation of the camera or the Opteka mount, though). It's not going to come off, but it's a bit mobile on the camera, which feels a bit cheesy. The extension barrel and lens themselves are nicely machined, and appear to be high quality. Although the Opteka copy says it's "Made and Designed in Japan" (from their website), the lens I received is clearly marked CHINA. No shock for the price, but a bit off-putting to have expectations set incorrectly (the box says "Designed in Japan" on the side, and "Made in China" on the bottom). Until I saw the CHINA marking, I would have been willing to believe the lens was made in Japan as well, so this isn't a ding on the quality, more a ding on Opteka's marketing department.
Due to its size, this add-on lens takes the G10 from "barely pocketable" to requiring a bag of some variety. It nearly doubles the bulk of the camera if you want to carry both G10 and fisheye with you.
I'm very satisfied with the lens, and highly recommend it if you have occasional recreational use for a fisheye lens, and don't want to drop $700+ on a decent fisheye for your SLR. I would not recommend it for regular or professional use except as an option of last resort, mostly due to the shaky mount and likely marginal durability.
UPDATE: February 17, 2010
I have upgraded to the G11, and am pleased to report that this add-on lens also works well with the G11. There have been no problems with the lens, although it hasn't seen a whole lot of action. I have one new gripe, which is that with the supplied lens caps, the extension tube and fisheye lens must be separated in order to have a lens cap on the back of the fisheye. It's not a huge deal, but I'd prefer to have a rear lens cap that fits on the extension tube instead of threading onto the back of the lens unit, so I don't have to unscrew the two pieces every time the lens is put away.

Click Here to see more reviews about: Opteka HD² 0.20X Professional Super AF Fisheye Lens for Canon Powershot G10 & G11 Digital Camera

Opteka 10x HD² Professional Macro Lens for Canon Powershot G10 & G11 Digital Camera Very Nice Product Now you can take close-up shots like you never took before. Opteka proudly presents the next HD10X macro lens. Originally designed for dentists and medical use, the HD10X is now available to the public. Unlike current single element lenses, the HD10X has 4 elements of high definition optical glass that provides unbelievable detail. Cameras fitted with normal lenses do not permit us to move closer than a certain minimum distance from the object being photographed. The Close-Up lens, which is simply mounted in the front of our normal taking lens, permits the taking of close- ups and also makes possible the photography of details which would be quite impossible without using the Close-Up lens. The easy to use solution for getting extra close. These lenses enable you to get much closer than the minimum focus of the standard camera lens - as close as 4 inches from the subject. Ideal for cataloging small items and focusing on details. Features: * Now you can take close-up shots like you never took before * Enables you to get much closer than the minimum focus of the standard camera lens - as close as 4 inches from the subject.

Buy Now

Click here for more information about Opteka HD² 0.20X Professional Super AF Fisheye Lens for Canon Powershot G10 & G11 Digital Camera

Kenko 0.43X Fisheye Super Wide Angle lens for 37mm Camcorders #SGW-043 Review

Kenko 0.43X Fisheye Super Wide Angle lens for 37mm Camcorders #SGW-043
Average Reviews:

(More customer reviews)
This is not a true fisheye lens. The wide angle is okay but you get some vignetting. The construction of the lens feels solid but it is as good as a curved piece of glass will get. (you get what you pay for)

Click Here to see more reviews about: Kenko 0.43X Fisheye Super Wide Angle lens for 37mm Camcorders #SGW-043

This wide-angle lens is extremely small, and was created for high resolution compact video cameras that have 37mm sized filter threads or smaller. This high-quality lens has an extreme curvature of field, or fish-eye effect - a creative look for extreme sports, web-casts, etc. The optical glass lens elements are multi-coated to reduce the possibility of flare, ghosting and internal reflection.The Kenko SGW-043 designed for the following DV camcorders and Digital cameras:SONY: DCR-PC110 / PC120BT / PC100 DCR-TRV740 / TRV50 / TRV30 Mavica MVC-FD200 / FD100 / FD92 / FD87 / FD85 / FD75Cybershot DSC-P50 / P30 / DSC-S30 / DSC-51 JVC: GR-DVL915U / DVL815U / DVL920U / DVL510U Using optional Kenko stepping rings will connect to the following DV camcorders and Digital cameras:Canon (with 30.5mm-37mm): ZR50MC / ZR45MC / ZR10 / ZR20 / ZR25MC / ZR30 MC / OPTURA PiCanon (with 27mm-37mm): ELURA20MC / ELURA10 / ELURA 2JVC (with 27mm-37mm): GR-DVM75U / DVM55U / DVM90 / DVM80 / DVM70 / DVM50SONY (with 30mm-37mm): DCR-TRV27 / TRV25 / TRV18 / TRV17 / DCR-PC5 / PC9Nikon (with 28mm-37mm): Coolpix 995 / 990 / 950(with N4137) Nikon Coolpix 880, Olympus C-4040 / C-2020 / C-2040 / C-3030 / C-3040 Please note: May cause vignetting with some digital still cameras. Zooming is slightly will eliminate the problem while yielding a wider-angle view than normal.

Buy NowGet 53% OFF

Click here for more information about Kenko 0.43X Fisheye Super Wide Angle lens for 37mm Camcorders #SGW-043

Opteka 72mm Screw-in Collapsible Rubber Lens Hood / Shade Review

Opteka 72mm Screw-in Collapsible Rubber Lens Hood / Shade
Average Reviews:

(More customer reviews)
This Opteka 72mm Screw-in Collapsible Rubber Lens Hood sounds like a good idea - as a replacement for the more solid original Nikon lens hood. However it is quite a disappointing product. While as a stand-alone object it is rather well made, it does not function well enough as a lens hood. It tends to slip out of the lens; with Nikon's 18-200mm lens it leads to vignetting (even when it is fully collapsed) - and this is usually not always visible through the lens; this may occur with a certain zoom length, but I have not systematically researched this; lastly when the camera sits on the table the rubber gets squashed and then when you come to use the camera - the hood does not form a regular circle - perhaps contributing to the vignetting effect. I am back to the original hood.

Click Here to see more reviews about: Opteka 72mm Screw-in Collapsible Rubber Lens Hood / Shade

Opteka rubber lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended you also get the added benefit of some extra protection from accidental impact.

Buy Now

Click here for more information about Opteka 72mm Screw-in Collapsible Rubber Lens Hood / Shade

Opteka LCK-3 Deluxe Lens / Camera Cleaning Kit Review

Opteka LCK-3 Deluxe Lens / Camera Cleaning Kit
Average Reviews:

(More customer reviews)
Came with something else I ordered, love it. Great for cleaning my camera lens. And since I wear glasses, the little microfiber cloth works a double shift.

Click Here to see more reviews about: Opteka LCK-3 Deluxe Lens / Camera Cleaning Kit

Cleans lenses, cameras, and filters, The lens cleaning solution is specily for removing oil and dirt.

Buy NowGet 75% OFF

Click here for more information about Opteka LCK-3 Deluxe Lens / Camera Cleaning Kit

Opteka 10x HD² Professional Macro Lens for 55mm Digital Camera Lenses - Review

Opteka 10x HD² Professional Macro Lens for 55mm Digital Camera Lenses -
Average Reviews:

(More customer reviews)
I bought this lens to go with 35mm adapter and it works great. I also took some macro shot videos with this and it came out very clear. Very happy with this product.

Click Here to see more reviews about: Opteka 10x HD² Professional Macro Lens for 55mm Digital Camera Lenses -

Now you can take close-up shots like you never took before * Enables you to get much closer than the minimum focus of the standard camera lens - as close as 4 inches from the subject. * Originally designed for dentists and medical use, the HD10X is now available to the public * 4 elements of high definition optical glass that provides unbelievable detail * Made In Japan, Lens caps and bag included, Lifetime warranty

Buy NowGet 75% OFF

Click here for more information about Opteka 10x HD² Professional Macro Lens for 55mm Digital Camera Lenses -

Opteka .35x HD² Super Wide Angle Panoramic Macro Fisheye Lens for Canon EOS / EF Review

Opteka .35x HD² Super Wide Angle Panoramic Macro Fisheye Lens for Canon EOS / EF
Average Reviews:

(More customer reviews)
As mentioned before, this is not a lens, it's a conversion lens.
I purchased this to use on the kit 18-55mm lens on my Canon Rebel XT. The kit lens on the camera is pretty decent, but not worth buying a ridiculously priced conversion lens... not to mention, buying a nice Canon fisheye is way out of my budget at the moment.
With all that said, I bought the Opteka because I wanted the semi fisheye effect for some experimental & skateboard photography, and because I'm too broke from the holidays to purchase a high end, dedicated fisheye lens.
The conversion lens impressed me quite a bit. Using the aforementioned kit lens, I attached the supplied conversion ring (metal, which is good) as the conversion lens' threads are too small to fit the 58mm threading of the Rebel XT's stock lens. No big deal, really... screw on the ring, then screw the conversion lens into the ring and you're all set.
If you zoom back all the way, you can get a significantly distorted image, appearing like an orb surrounded by dark vignetting (like looking through a door's peephole).
If you zoom past the vignetting, you can achieve some pretty decent wide angle shots, with some expected distortion on the far left, far right, and very center of the image... then again, that's what fisheye's are all about.
The conversion lens comes with a little hood scoop, but it really doesn't need it, and if you pull your focus back all the way with the scoop out, you'll wind up with two metallic crescents increasing your vignetting.
The conversion lens comes in a pretty rigid leather (or fake leather, I really don't know) case lined with a suede-like material. If you're buying this for your Rebel's 18-55 kit lens, expect to see a metal ring in the box.
The conversion lens unscrews toward the bottom, and when the bottom section is attached to your camera you wind up with a macro lens. I've played with it just enough to say that "it works," but 99% of my usage is based around the fisheye functionality.
If you're looking to blow around $30 and you want to have fun experimenting with your DSLR (or video camera if it fits or you have a ring adapter for it), you can expect to get your money's worth out of this thing.
Shooting with a fish/semi fish requires a different type of mentality than shooting normal photos. While fisheye photography can be overdone, they make for really good up-close action shots, nature shots, and even landscapes & experimental work. This conversion kit *will* distort your image, it's supposed to. It's all about using the curvature to enhance your subject.
Last note: on some tests from 2 up to 10 feet away, the auto focus functionality seems to work fine with this extension. If you pull the lense back all the way, the vignetting will be a black blurry halo, as the multipoint auto focus will concentrate on whatever you're pointing at (rather than the conversion lens' inner lining).
For best results, prepare your shot and focus manually. Very fun conversion kit, by no means professional grade, but pretty darn good. Great to have in the camera bag.

Click Here to see more reviews about: Opteka .35x HD² Super Wide Angle Panoramic Macro Fisheye Lens for Canon EOS / EF

The new Opteka High Definition² .35x Ultra Wide Angle Fisheye Converter Lens increases the versatility of your existing lens to provide breathtaking ultra wide angle views. And it's so easy to use! Additionally the built-in detachable macro lens allows you to take extreme high resolution close-up shots! Nothing changes the way you see the world like High Definition² and no company does High Definition² like Opteka. Opteka's glass optics define High Definition. Change the way you view the world. Enjoy outstanding detail, enjoy enhanced clarity, enjoy Opteka!

Buy NowGet 70% OFF

Click here for more information about Opteka .35x HD² Super Wide Angle Panoramic Macro Fisheye Lens for Canon EOS / EF

Opteka CFM200 58" 5 Section 8x Carbon Fiber Monopod Review

Opteka CFM200 58 5 Section 8x Carbon Fiber Monopod
Average Reviews:

(More customer reviews)
Seems well made, very light, quick set up, has a nice zippered case. Would recommend purchasing a small ball head for it or any monopod...

Click Here to see more reviews about: Opteka CFM200 58" 5 Section 8x Carbon Fiber Monopod

Opteka carbon fiber monopods are significantly lighter than standard aluminum models without compromising performance. Its 8x technology features eight layers of carbon designed to provide maximum strength and stability while keeping the monopod's weight to a minimum. These are the perfect camera support for hiking and travel. Each monopod features both a 1/4" and 3/8" threaded mount to accommodate any camera or head.

Buy NowGet 59% OFF

Click here for more information about Opteka CFM200 58" 5 Section 8x Carbon Fiber Monopod

Jenis J-C450D-S-B Standard Battery Grip for Canon XS and XSi Digital SLR Cameras (Black) Review

Jenis J-C450D-S-B Standard Battery Grip for Canon XS and XSi Digital SLR Cameras (Black)
Average Reviews:

(More customer reviews)
Just received it today and immediately installed to my xsi. It fits so great like the the canon brand hand grip. This is a great alternative to those who are in a budget. It has a shutter buttons too and a zoom in zoom out preview. I havent found cons yet on this product but i would highly recommend this. I only paid 29usd though the seller offered 20% discount on check out and the shipping was free! what a great deal for a hand grip! took only 5 days shipping from check out.

Click Here to see more reviews about: Jenis J-C450D-S-B Standard Battery Grip for Canon XS and XSi Digital SLR Cameras (Black)

Due to the convenience of deleting unwanted photos and inexpensive media storage, we take a lot more photos than the film era. Today's digital camera puts a lot of stress and loading on the battery, hence the battery grip becomes an essential accessory to most of us. Jenis battery grip uses the same build material as the original manufacture on all its product lines, to ensure a long time trouble free operation with your beloved digital SLR camera. The build quality and ergonomic not only matches the original equipment, there are some added functions on the higher end products that are designed with the professionals in mind. The extra features are not available either from the original equipment or the other battery grip on the market. The S model (Standard) provides the same function/capability as the original equipment. It can take up to two Li-ion battery or 6 to 8 AA batteries (depending on the model) to provide extra power reserved for longer shooting time. Depending on the camera design, some can also increase the continue shooting speed. There is an extra vertical shutter button to provide easy operation when shooting in portrait/vertical position. The control wheel provides the same functions as the original control wheel with easy access when operating in vertical position. The P model (Professional) has all the features in the S model but with some advanced essential functions. There is a clock which not only display time, but also serves as a self-timer or long exposure shutter control that can provide up to 99hr 59min 59sec delay time/B shutter. The SD model (Super Dual Storage) has all the features the P model has except the remote capability, but adds two extra high speed CF slots for people who like to take a lot of photos on a trip. A larger B&W LCD screen is provided to display some of the important shooting information. The grip also does some basic file operation. A high speed USB2.0 connection is also provided.

Buy Now

Click here for more information about Jenis J-C450D-S-B Standard Battery Grip for Canon XS and XSi Digital SLR Cameras (Black)

Opteka SW-1 Sidewinder Joystick Pistol Grip Ball Head with Quick Release Plate for Tripods & Monopods Review

Opteka SW-1 Sidewinder Joystick Pistol Grip Ball Head with Quick Release Plate for Tripods and Monopods
Average Reviews:

(More customer reviews)
The Opteka SW-1 seems very well built, it is all metal and features a nice quick release plate. The relase plate can be attached to either the end oposite the ball or the end with the trigger. It is attached using an allen screw so it isn't the kind of thing you will be moving between mounting positions frequently. An allen wrench is included. The SW-1 also has a tension adjustment that helps hold the head in place when you have a heavy load on it. It also comes with a tripod/monopod screw insert so you can use the ball head on either a tripod or monopod. The ball itself is pretty large, I'm guessing around 1.25"
When the head is locked into place, surpisingly, it is very stable. It easily holds my Canon 7D with battery grip and 300mm f4 lens. The spring loaded trigger works smoothly, but you can tell there is a strong spring in the head. This may cause problems if you have arthritis in your hands or have very weak fingers, but most people should be able to easily operate it.
Now here is why this isn't a 5 Star Review: When I first used this ball head it was VERY sticky when you tried to release and move it to a new position. It was usable, but it wouldn't move smoothly and it felt like you were using a very cheap ball head. It seemed like it needed some lubrication but I was thinking that grease wouldn't be a good thing to use for the long run. I wound up moving the ball head to the 90 degree position so most of the ball was exposed and then took a #2 pencil and "colored in" the exposed area of the ball. Then I exposed a different area and repeated the "coloring in" process. Guess what? Sticky problem solved! The head moves VERY smoothly and is a pleasure to use! No 5 stars because I'm not sure how long this fix will last.
Given the low price, this ball head is an excellent value if you are looking for a pistol grip type ball head.


Click Here to see more reviews about: Opteka SW-1 Sidewinder Joystick Pistol Grip Ball Head with Quick Release Plate for Tripods & Monopods

The Opteka Sidewinder is a fast to set up and an easy to use tripod / monopod head, designed for lightweight video or still photography. The very act of taking your hand away from the grip locks the head into position, which eliminates the extra step of having to tighten a knob or lever before being ready to shoot. You have immediate access to half of a sphere in which to position your camera. The tension of the ball can be adjusted to accommodate the load weight. The included quick release plate allows you to remove your camera at a moment's notice.The Opteka Sidewinder can support up to 6.6 lbs. For example, that means 35mm up to an 80-200mm f/2.8 lens. This head is ideal for both tripods and monopods.

Buy NowGet 78% OFF

Click here for more information about Opteka SW-1 Sidewinder Joystick Pistol Grip Ball Head with Quick Release Plate for Tripods & Monopods

Opteka SR-90 Universal 8" X 10.5" Snoot & Reflector for External Camera Flashes Review

Opteka SR-90 Universal 8 X 10.5 Snoot and Reflector for External Camera Flashes
Average Reviews:

(More customer reviews)
I have used this product as a snoot for my single compact fluorescent stand light and Canon Speedlite 430EX II flash. I have been very pleased with the performance of this snoot/reflector. It secures tightly with the velcro that it has.

Click Here to see more reviews about: Opteka SR-90 Universal 8" X 10.5" Snoot & Reflector for External Camera Flashes

The Opteka SR-90 can be used as a snoot or reflector. Softens, broadens, and diminishes the light output of any tungsten or flash light source. Includes the Opteka CL-2 clinch band for a mess-free easy attachment.

Buy NowGet 57% OFF

Click here for more information about Opteka SR-90 Universal 8" X 10.5" Snoot & Reflector for External Camera Flashes

Bower SFD290 Digital Automatic Zoom Bounce Flash for Canon EOS Rebel XT, XTi,... Review

Bower SFD290 Digital Automatic Zoom Bounce Flash for Canon EOS Rebel XT, XTi,...
Average Reviews:

(More customer reviews)
Right out of the box I noticed a slight wiggle in the flash unit after mounting it to the camera. The next day the flash unit wiggle turned into a serious lean and flopping instead of wiggling. I could here the spring in the shoe mount when I tried to stand it up right. The outer shoe adapter housing that mounts to the flash unit body uses steel screws into steel threads. However, inside the adapter housing is a metal plate that holds the adapter together, it uses steel screws into plastic threads. One screw hole was stripped and the screw was half way out. The other screw was not far behind and was stripped beyond a snug fit. These two screws and a metal plate compress the spring and are what's really keeping the unit together and upright. The metal power contact plates are fastened with steel into plastic but they don't bare any of the weight. Anyway, it's not easy to describe without knowing the name of the actual parts. The bottom line is that there are two screws going into plastic threads that keep it from coming apart and they may come stripped like mine.
My choices were to send it back and get another one with the same cheap construction or just return the flash. I needed the flash the next day so I decided to make my own modifications with some epoxy. A little bit of epoxy in each screw hole and on the metal plate did the trick. I don't recommend doing this if you're not mechanically or electrically inclined. It also voids the warranty. I chose to do my own repairs because I had to and until I'm ready to spend the big bucks on good flash unit. I don't recommend buying the Bower SFD 290. The flash itself works well but it's just one plastic thread hole away from crashing to the floor.


Click Here to see more reviews about: Bower SFD290 Digital Automatic Zoom Bounce Flash for Canon EOS Rebel XT, XTi,...

The Bower SFD290 Digital Automatic Zoom Flash is an innovative designed flash unit for both digital and traditional SLR cameras with a wide array of high-end features at an affordable price. This model -- compatible with Canon SLR cameras -- features fully automatic operation and helps photographers fill shadows, add depth, avoid red-eye and improve image resolution. Features: * Guide Number of 30m / 99ft * Full automatic operation with variable f/stop setting and full burst manual mode * Zoom, Bounce and Swivel Head * Economically powered by four AA-size batteries * Compatible with all Canon SLR cameras

Buy Now

Click here for more information about Bower SFD290 Digital Automatic Zoom Bounce Flash for Canon EOS Rebel XT, XTi,...

Opteka OPT-SC37FE Platinum Series 0.3X HD Ultra Fisheye Lens for 25mm, 30mm, 30.5mm & 37mm Digital Video Camcorders Review

Opteka OPT-SC37FE Platinum Series 0.3X HD Ultra Fisheye Lens for 25mm, 30mm, 30.5mm and 37mm Digital Video Camcorders
Average Reviews:

(More customer reviews)
I was put on to this product by a friend of mine that owns the Century Optics Baby Death Lense. This one is almost identical and for only 1/3 of the price...It's easy to install & take out and it has a better fisheye than the old lense I used (Opteka .43X HD). I recommend this to anyone looking for great fiseye effect on their videos.

Click Here to see more reviews about: Opteka OPT-SC37FE Platinum Series 0.3X HD Ultra Fisheye Lens for 25mm, 30mm, 30.5mm & 37mm Digital Video Camcorders

An essential tool for extreme sports and dramatic action shooters. The 0.3X Ultra Fisheye Adapter offers an extreme fisheye effect and a high degree of barrel distortion. It exaggerates depth by pulling nearby objects closer and causing distant objects to recede into the background. Advances in high-index / low-dispersion optical glasses, new barrel materials, and exotic anti-reflection coatings, along with the latest in computer-aided-design / computer-aided-manufacturing, are combined to produce lenses of unprecedented quality. Diamond-cut from crystal-clear, water-white optical glass, Opteka lenses are ground and polished to a precise precision. Because all Opteka lenses are designed and manufactured with the highest possible degree of consistency, you can swap lenses mid-shoot with no discernable variation in color or effect. The unprecedented purity, color saturation and repeatability of Opteka lenses virtually eliminate the need for lab color timing corrections caused by other lenses. This puts more creative control where it belongs - in your hands. Opteka lenses stand up to the most rigorous demands on the stage and on location. Opteka's hard anti-reflective (AR) coating offers protection specially formulated to resist flaking, peeling and scratching. This proprietary AR coating also reduces light loss and flare to less than 1% per surface, compared to untreated glass which has a light loss of 4% per surface. Opteka lenses allow you to shoot with total confidence!

Buy NowGet 67% OFF

Click here for more information about Opteka OPT-SC37FE Platinum Series 0.3X HD Ultra Fisheye Lens for 25mm, 30mm, 30.5mm & 37mm Digital Video Camcorders

Opteka 52mm Screw-in Collapsible Rubber Lens Hood / Shade Review

Opteka 52mm Screw-in Collapsible Rubber Lens Hood / Shade
Average Reviews:

(More customer reviews)
I purchased this hood for use with a DX-format Nikon 18-55mm VR lens (27-82mm film equivalent) to accommodate it's relatively large magnification range. The hood threads on easily, and still provides threads on the front end for attaching more filters if you choose to keep the hood on all the time. The hood is easily adjustable into 3 positions, which is a nice feature. I found that when the hood is pulled all the way back and I have another filter attached, I see some vignetting on the wide end (f < ~30mm). If I remove the filter, it's all good. So if you're a "no protective filter" type, this is a moot point. But, if you're accustomed to having a protective filter in place, you'll need to remove it to avoid vignetting for wide-angle shots with this hood. For normal to telephoto lengths, this hood is great, and should be no problem with additional filters in place - you should always be able to adjust the hood length to accommodate.

Click Here to see more reviews about: Opteka 52mm Screw-in Collapsible Rubber Lens Hood / Shade

Opteka rubber lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended you also get the added benefit of some extra protection from accidental impact.

Buy Now

Click here for more information about Opteka 52mm Screw-in Collapsible Rubber Lens Hood / Shade