Average Reviews:
(More customer reviews)Even though, I use the Nikon CLS to trigger my speedlights, I have some flash units that are not CLS compatible and I wanted to use them. I gave a try to these remote triggers, without expecting too much from them. But I was surprise by the reliability and easiness of use. These have hot shoes you use to trigger your flash unit but also they offer the synch cable option if your flash is not supported by the hot shoe. The construction quality is not impressive, so you have be a little careful when adjusting the knobs to not break the plastic case; specially on the transmitter one. I have not tested them with long distances, only between 3 to 5 meters and no issues at all. There is no TTL capability on these transmitters; you have to invest a lot more if you want a transmitter with TTL capability. The triggering is very consistent and I have only experience a couple of misfires but I guess it was my fault by not securely attaching the trigger device on the camera hot shoe.
Click Here to see more reviews about: Wireless Flash Trigger & 4 Receivers For Nikon SB900 SB-900 SB800 & Many More
Specifications:4 channels with hot shoe connector for external flashesTransmitter Power: 23A 12V battery (installed)Receiver Power: 2 AAA BatteriesMaximum Working Distance: 30m (open area, without interference)Operates on Frequency: 433MHzTriggering life: up to 20,000 timesCompatible with:Canon SpeedLite 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EZ, 430EX, 430EX II, 420EX, 420EZ, 380EXNikon SpeedLite SB900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24Olympus FL-50R, FL-50, FL-36R, FL-36Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FTSigma EF-530 DG Super, EF-500 DG Super, EF-430Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AF, 344D, 333DVivitar 285HV, DF-400MZ, DF-340MZ, 2700Other flash models with a trigger voltage of 12V or lower Transmitter:It can be mounted on the hot shoe of the camera or connected to the PC socket of the camera with the cord supplied. Using a PC socket connection (if your camera has one) allows simultaneous use of a hot shoe-mounted flash unit and off-camera flashes with this set. There's a test button on the top of the transmitter for test firing. The transmitter is powered by a small 12V alkaline battery. Receiver:It has a mounting bracket which fits into a traditional flash stand, with a ¼-20 threaded hole for mounting on a light stand or tripod. An adjusting knob allows the receiver to tilt on the bracket, with detents at straight up and 45 degree forward and backward positions (It can be tightened in any position +/- 90 degrees from vertical). There's a hot shoe for mounting a flash unit on the top of the receiver, and there's a small on/off switch and a small LED light on the front of the unit. The back of the receiver snaps off to reveal the battery compartment and two dip switches for channel selection. It is powered by 2 AAA batteries . 100% brand new. 1 year warranty.
0 comments:
Post a Comment